Fibo profiles are designed for use with our wall panels to complete your installation correctly

Depending on the size and shape of your room, use the appropriate shaped profile to fit the panels correctly and securely into place. The use of an approved polymer sealant in conjunction with the profiles will ensure a watertight fit every time.

  • INTERNAL PROFILE

    Use to fit panels into an inside 90° corner.

    View illustration of Internal Profile in use.
    Internal Corner Profile
  • EXTERNAL PROFILE

    Use to fit panels around an outside 90° corner or in a window reveal or for edging box work.

    View illustration of External Profile in use.
    External Corner Profile
  • FINISHING PROFILE
    (L - SHAPED OR J - SHAPED)

    Use to finish off any raw outer edges of the panels or for edging box work.

    J & L Shaped Profile
  • H-SHAPED STACKING PROFILE

    Use this profile to stack panels on top of each other in areas where the panel height required is more than 2400mm.

    Note: Cannot be used with the Aqualock system.
    H Shaped Profile
  • BASE PROFILE

    It is essential to use a base profile in all wet areas to prevent water penetration from underneath the panel.

    View illustration of Base Profile in use.
    Base Profile
  • KITCHEN PANEL BASE PROFILE

    Use in all wet areas to prevent water penetration from under the panel.

    Install between bottom of panel and top of kitchen worktop.

    Kitchen Base Profile
    Kitchen Base Profile
  • KITCHEN PANEL INTERNAL PROFILE

    Use to fit panels into an inside 90┬░corner.

    This profile is 580mm long for a perfect fit to your kitchen panel.

    Kitchen Internal Profile
    Kitchen Internal Profile
  • KITCHEN PANEL
    L-SHAPED PROFILE

    Use to finish off any raw outer edges of the panels or for edging box work.

    This profile is 580mm long for a perfect fit to your kitchen panel.

    Kitchen L-Shaped Profile
    Kitchen L-Shaped Profile

A BASE PROFILE MUST BE USED IN ALL AREAS WHERE PANELS WILL BE IN CONTACT WITH WATER. SEALING OF ALL EXPOSED PLYWOOD IS ESSENTIAL TO ENSURE JOINTS ARE TOTALLY WATERPROOF.